larsonelectronics

https://www.larsonelectronics.com Larson Electronics - Texas Made Industrial Lighting and Power Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/282095/50-kva-pad-mount-transformer-22860y-13200-grounded-wye-primary-240-120v-secondary-mineral-oil-fluid-onan The MT-PML-R7-1P-GNN-50KVA-SZ-LT-DF-A6-BM-CZ-2B4-M1 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in indoor, outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/104784/crank-up-mini-light-tower-w-3000va-generator-wheeled-cart-base-7-12-light-mast Made in the USA The WAL-ML-3G Mini Light Tower with 3000VA Generator from Larson Electronics is an ideal solution for operators who need a fully portable yet easy to operate light system capable of illuminating large areas. Adjustable from 7 to 12 feet in height and equipped with a 3000VA generator, this unit allows operators to mount their own lights, security cameras, and other equipment to the mast head. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/70380/42w-hazardous-location-light-fixture-non-metallic-3-led-lamps-corrosion-resistant-marine-application-c1d2-c2d2 The Larson Electronics HALP-24-3L-LED Hazardous Area LED Light Fixture is U.S./Canada approved Class 1 Division 2 Groups A, B, C and D and is specifically designed to handle the rigors of wet and corrosive marine environments. This hazardous location LED light has a T4 temperature rating and carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers. This two foot long, three lamp LED fixture is ideal for operators seeking a top quality hazardous location light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The HALP-24-3L-LED hazardous area LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Four corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/148928/24-electric-explosion-proof-fan-7980-cfm-24-inch-wall-or-ceiling-mount-c1d1-c2d1 The Larson Electronics EPF-24-PM Explosion Proof Circular Fan redirects and circulates air within hazardous locations. This explosion proof fan meets UL standards for hazardous areas and provides a high 7,980 CFM output for effective airflow in larger spaces. This electric explosion proof circular fan is suitable for confined spaces and is approved for use within Class I Divisions 1 & 2 and Class II Divisions 1 & 2 hazardous locations. This fan features a high efficiency 1/4 HP motor which is fully encapsulated and a precision balanced, non sparking aluminum blade assembly for high output and protection against accidental ignitions. This fan has 24" propeller diameter and produces over 7,980 CFM of air output for excellent circulation of air in large areas. The EPF-24-PM has an ambient temperature rating of 10°C to 40°C. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/147609/8w-explosion-proof-led-strobe-light-low-voltage-30-flash-patterns-sync-capable The Larson Electronics EPSLED-80-SVS-DC is a powerful explosion proof LED strobe light that is suitable for installation in hazardous locations. This 8-watt unit operates on 12V DC or 24V DC and features a total of 9 high-intensity LEDs. Equipped with 30 flash patterns, the LED beacon can be sycnchronized with other strobe lights on fire alarms and compatible warning systems for simultaneous operation. This unit is offered in the following light colors: red, blue, amber and white. The EPSLED-80-SVS-DC is a compact, versatile lighting solution for warning and advanced notification systems, such as fire alarms. This explosion proof unit runs on 12V DC or 24V DC while drawing 8 watts. Operators may choose from a total of 30 different flash patterns. Features for syncing with compatible alarm systems and other strobe lights is available. Nine high-intensity LEDs produces superior illumination in the hazardous location. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/47067/explosion-proof-black-light-365nm-uv-cut-off-lens-class-1-div-1-and-class-2-div-1-generation-2 The Larson Electronics EPL-UV-20W-G2 Hazardous Location Approved UV flashlight has a Class 1 Division 1 Groups A-D approval and produces a beam in the ultra violet spectrum capable of reaching over 200 feet. This model features an upgraded bulb for a more powerful UV output. This Generation 2 UV HID flashlight features a newly designed bulb, 365 Nm UV cutoff lens, and a 90 minute run time on a single charge of its waterproof 2600mAh Lithium Ion battery pack. A single 20 watt high UV output HID bulb powered by an internal ballast is combined with a 365 Nm UV cutoff lens to produce a UV beam capable of reaching over 200 feet in length. This flashlight is IP68 rated waterproof, making it capable of withstanding submersion under pressure without damage. The durable aluminum body has a black anodized coating to provide durable protection for this units` internal electronics and an aesthetically pleasing appearance. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/50934/30w-explosion-proof-led-fixture-class-1-division-2-3-low-profile-light-strip-11-25v-ac-dc-low-voltage The HAL-36-25W-LED from Larson Electronics is a Low Profile Hazardous Location Lighting Solution that is approved for Class I Division 2 environments and is NRTL certified to be UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 3,900 lumens, operates on 12-24 V AC/DC (±10%), and is suitable for a variety of applications. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/71451/explosion-proof-tool-tap-reel-industrial-50-foot-cord-reel-w-explosion-proof-outlet-12-3-cable The EPLRT-50-12.3-GCR Cord Reel w/ Explosion Proof Tool Tap provides easy management of an included 50 feet of SOOW cord, giving operators in hazardous locations the ability to easily extend the working reach of their tools and lighting equipment. This cord reel with Class 1 Division 1 tool tap is ideal for petroleum facilities, waste water treatment plants, grain storage and handling silos, paint booths, underground mines, chemical plants, and much more. This explosion proof tool tap is rated for Class 1 Division 1 and Class 2 Division 2 environments and includes the reel, 50 feet of 12/3 AWG SOOW cord, and a Class 1 Division 1 twist lock receptacle. For proper protection and to maintain HAZLOC approval, a matching twist lock plug should be used with this unit’s power receptacle. This unit is of a modular design and is suitable for indoor or outdoor applications. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/146696/26w-red-explosion-proof-compact-fluorescent-exit-sign-1800-450-lumens-class-i-div-1-2 The EPL-EMG-EXT-26W-R from Larson Electronics is a Class I Division 1 & 2 Explosion Proof Compact Fluorescent Light (CFL) Exit Sign with Emergency Battery Backup. The EPL-EMG-EXT-26W-R is designed to be able to withstand harsh conditions and hazardous environments with a durable aluminum construction. This 26W CFL exit sign with emergency light operates on 120-277V AC voltage and includes a sealed lead acid battery for emergency situations. The EPL-EMG-EXT-26W-R produces 1800 lumens during normal operation and 450 lumens during emergency power situations. The EPL-EMG-EXT-26W-R operates both under normal conditions via line voltage and under emergency conditions via battery power. This unit is rated for Class I Division 1 & 2 Groups C & D, Class I Zones 1 & 2 Groups IIA & IIB, Class II Divisions 1 & 2 Groups E, F and G and Class III hazardous environments. The emergency exit sign is constructed from durableand corrosion resistant copper-free aluminum and has a Baked-on epoxy/polyester powder finish for increased durability. The exit sign is fully sealed and has a NEMA 3 rating for protection against the ingress of dust and water. This emergency-only exit sign also features an LED status indicator light that is visible through the lens to indicate charging. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/144215/50-watt-portable-explosion-proof-mini-led-brick-light-c1d1-c2d1-aluminum-frame-120-277v The EPL-PM-50LED-100 Explosion Proof LED Brick Light from Larson Electronics is rated Class I Divisions 1 and 2 Groups C D and Class II Divisions 1 and 2 and uses a 7 inch LED light head to produce 6,250 lumens of light while drawing only 50 watts. The EPL-PM-50LED-100 explosion proof LED Brick Light provides 4,000 square feet of work area coverage with 6,250 lumens of light output. This portable LED light is mounted to an A-frame style aluminum base and has an adjustable LED light head measuring 7 inches square. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/48406/infrared-led-pistol-grip-spotlight-15-hour-runtime-rechargeable-lithium-ion-3-watt The Larson Electronics RL-85-3W1-IR Infrared LED Pistol Grip Spotlight is an extremely rugged and effective IR spotlight designed to give users in operations requiring infrared illumination a powerful, durable and easy to use source of IR light. This IR spotlight produces an infrared light beam approximately 1,800’ long by 175’ wide in the 850 to 940 Nm range depending upon configuration, requires no tools for servicing and runs for 15 hours on a single charge. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/295130/50-kva-pad-mount-transformer-12470y-7200-grounded-wye-primary-240-120v-secondary-fr3-biodegradable-fluid-knan The MT-PML-R7-1P-GMR-50KVA-SZ-LT-DF-A6-BF-CZ-2B4-M1 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in indoor, outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/288754/150a-power-panelboard-3ph-main-breaker-panel-18-circuit-480y-277-18-breaker-slots-nema-1-bottom-feed-wall-mount The Larson Electronics MPD-PB-LB-MB-YE-G-L-18-BF-N1-Z Power Distribution Main Breaker Lighting Panelboard facilitates electrical and power connections in industrial sites. This unit provides operators the ability to safely tap into and distribute three phase 480Y/277 AC power from a variety of sources including generators and direct grid power. Operation: • Voltage: 3-Phase 480Y/277 AC 3PH Wye-N • Panel: 150A MB Hinged 18 Circuit Count • Branch Breaker(s): (0) Breakers Included; Compatible with Larson Electronics Din Rail Mount Breakers. Not compatible with GFCI Style Breakers. • Enclosure: NEMA 1 for Indoor Applications, Bottom Feed Panelboard: The MPD-PB-LB-MB-YE-G-L-18-BF-N1-Z power distribution Lighting panelboard unit gives operators the ability to power and protect their MPD-PB-LB-MB-YE-G-L-18-BF-N1-Z volt equipment. On the primary side, operators connect three-phase 480Y/277 volt line-in power using a customer-provided cord or line-in conduit. This panelboard distributes power from an electrical feed to various branch circuits. Breaker poles, breaker amperage, circuit count, mains protection, and branch breaker layout can be customized upon request. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/50369/red-led-pistol-grip-hunting-spotlight-16-hour-runtime-rechargeable-lithium-ion-3-watt-led The RL-85-3W1-RED Red LED Pistol Grip Spotlight from Larson Electronics is an extremely rugged and effective red LED spotlight designed provide a durable and easy to use source of red light for speciality applications. This portable spotlight produces a powerful red light beam reaching approximately 600’ long by 175’ wide, requires no tools for servicing, and runs for 16 hours on a single charge of its included lithium ion battery pack. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/146686/150w-explosion-proof-led-light-base-stand-w-magnetic-feet-22-light-c1d1-jbox-100-cord The EPL-16BS-1X150LED-2MB-JB2-100 Explosion Proof LED Light from Larson Electronics is rated Class I Division 1-2 Groups C & D and Class II Division 1-2 and uses a 22 inch Cree LED light head to produce 21,000 lumens of light while drawing only 150 watts. This unit comes equipped with two magnetic feet to help secure the light fixture in position during deployment. The EPL-16BS-1X150LED-2MB-JB2-100 explosion proof LED light provides 10,000 square feet of work area coverage with 21,000 lumens of light output. This portable LED light is mounted to a four leg aluminum base and has an LED light head measuring 22 inches wide by 14 inches tall. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. Often referred to as simply a “tank light,” this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical containers and ship storage tanks. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/293877/10-kva-overhead-distribution-transformer-pole-mount-12470grdy-7200-grounded-wye-pri-120-240v-sec-biodegradable-oil-copper-knan-tap-changer The MT-UPM-R7-1P-GMR-10KVA-SZ-BB-A6-BB-CZ-Z-M1 Overhead Distribution Pole Mounted Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. This power distribution system is designed for overhead, pole mount installations and use. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/154208/8w-low-intensity-led-light-ac-input-dc-output-steady-burn-type-b-faa-compliant-red The Larson Electronics AVL-L810-CPR-RED is a Type B Low Intensity LED Light for the aviation sector and harsh outdoor environments. This FAA compliant unit offers red light output in a steady burn configuration. The IP66-rated LED lamp offers protection from electrical surges and lightning. Constructed of aluminum and polycarbonate, the LED obstruction light comes with a lightning rod and a circular base plate for mounting on flat surfaces and walls. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/281321/30-portable-solar-surveillance-tower-10-trailer-2-ptz-cameras-led-strobe-4g-lte-gps The Larson Electronics SPLT-.53K-LM30-2XPTZ.20X-CL1B.B-TLR10-W4G Portable Solar Surveillance Tower provides a safe and effective way for operators to monitor locations from elevated positions between 13.5` to 30`. This solar security assembly features a telescoping tower that folds over for easy transportation, a rotating boom that allows 360° rotation and a removable mast head for storage when not in use. Two full-HD security cameras can be used to record images (supported by a 1TB NVR). This unit has two 265-watt solar panels, a 500aH capacity battery bank with 250aH being usable and a 120V battery charger for powering the cells when sunlight is unavailable. Operators can access a 4G LTE wireless router and GPS on the system. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/294660/power-distribution-panel-60a-208y-120v-3-phase-5-breakers-1-dsn30-1-dsn20-1-dsn20-120v-2-5-20r-outlets-n3r This unit is Made In USA - Manufactured in Texas The MPD-EB4-TB.60AB-YT0-GZ-1.D14-2.D13-2.N10-M1-N4X from Larson Electronics is a Power Distribution Panel that is designed for reliable, safe, and convenient power distribution. This 60-amp unit provides three-phase 208Y/120 V Wye AC and is protected via a main circuit breaker panel. The power distribution panel provides operators the ability to safely tap into and distribute 208Y/120 V Wye power from a variety of sources including generators and direct grid power. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/147074/5-5w-l810-led-obstruction-light-single-lamp-red-lens-w-wire-guard-120-240v The AVL-L810-1X-R-120V-WG L810 LED Obstruction Light by Larson Electronics is suitable for aviation lighting systems, military applications and obstruction lighting in general locations. This 5.5-watt luminary operates on 120-240V AC and features a red polycarbonate globe for 360-degree visibility. The unit is compliant with FAA Rules and Regulations and Canadian Aviation Regulation. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/284856/25-kva-pad-mount-transformer-12470y-7200-grounded-wye-primary-240-120v-secondary-biodegradable-fluid-knan The MT-PML-R7-1P-GMR-25KVA-SZ-LT-DF-A6-BB-CZ-2B4-M1 from Larson Electronics is an Industrial Pad Mount that Transformer offers powerful, reliable, and efficient power distribution in indoor, outdoor, and public locations. The low operating costs, low heat emissions, and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/291955/fused-disconnect-switch-400-amp-600v-3ph-ac-3-pole-3-wire-3-class-j-fast-acting-fuses-wall-mount-nema-4x The MPD-DS-WML-FDS-3P-3W-600V-400A-DF-BM-N4X-FA from Larson Electronics is a Power Distribution Fused Disconnect Switch that is designed for reliable, safe, and convenient power distribution at industrial work sites. Designed for wall mounting installations, the disconnect switch is protected by three 400A class J fuses and a NEMA 4X rated, 304 stainless steel enclosure. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/316/rechargeable-hid-handheld-light-rl-11 The RL-11 from Larson Electronics is a Rechargeable HID Handheld Light that contains a 35 watt HID bulb and produces 3,200 lumens of intense light output. The RL-11 produces a 3000 foot beam in the 4300K color range and in side by side tests, outperforms the $4,000+ Surefire Hellfighter™ in brightness and distance. This high power HID light reaches full power in less than 2 seconds, is waterproof, and will run for 90 minutes on a single charge of its 14.4V, 5,000mAh rechargeable lithium-ion battery. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/244211/industrial-horn-led-strobe-warning-system-120v-ac-weatherproof-nema-4x-class-1-beacon The WAL-TL-1XCL1B-C-PA-120V from Larson Electronics is an Industrial Horn & Strobe Light that provides an audible and visual warning system within wet locations. This unit features a powerful LED strobe light in addition to a horn that can produce eight different tones to sound levels up to 110dBA. The WAL-TL-1XCL1B-C-PA-120V is a powerful alert and signal horn/LED strobe light combination that offers multiple tones, remote operation capability and multiple LED light color options. The WAL-TL-1XCL1B-C-PA-120V industrial horn and LED strobe light provides operators with an effective and powerful alert/signal system that can withstand demanding conditions and be heard over the operation of industrial machinery. The entire unit is finished in durable grey powder coat for resistance to corrosion, is weatherproof/dustproof, and NEMA 4X and marine rated for wet environments. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1