1776PatriotWins

2d wood inlay end grain cutting board, this symbolizes my CNC work and will be hung outside my workshop. You can also check me out on www.facebook.com/groups/steelknightcnc/ https://rumble.com/c/c-655827​ Twitter @steelknightC Intro music - https://www.bensound.com

Hello yall, I have built this CNC machine from scratch, I designed it in fusion 360. Built with steel, since it was cheaper then aluminum profiles. I used 80x80mm square tubing that was 2mm thick by 800mm long for the feet. I used 40x 80mm rectangle tubing for the table. 20b80x400mm rectangle for the arms of the gantry. 4mm thick X gantry is 2 80x80 mm welded together. to come up with an overall 160 width and 1500mm long. I used 1605 ball screws and HGH or HGR 20 linear bearings. the alu plates are 15 mm thick, reason for that is I will also cut aluminum on this machine. You can also check me out on https://rumble.com/c/c-655827 Twitter @steelknightC Intro music - https://www.bensound.com

Follow me on a journey, to produce cnc inlays and 3d carving. Using vetric pro software and mach 3 cnc software. In this video I'am making a 3d golf carving and a 2d inlay The bits I used in this is: 6mm end mill 6mm shank, 22mm 60degree v-bit you can also follow me on https://twitter.com/SteelknightC Also on https://anonup.com/@Dominickp and https://www.youtube.com/channel/UC-JJGJmnnmJuk58Vj2P-08A

Hello all, I do CNC graphics work in various woods.