ShowPhil

Hi Everyone! Typical welding table clamps can cost in excess of $50 for each clamp! In this video, I walk you through how I fabricated my own welding table clamps for UNDER $5 each! AND........they work AMAZING! Items I used in this video: Lowes: Kobalt Stool - https://www.lowes.com/pd/Kobalt-Work-Seat/1240699 5/8" x 2.5" Zinc Plated Course Threat Bolt - https://www.lowes.com/pd/Hillman-5-8-in-x-2-1-2-in-Zinc-Plated-Coarse-Thread-Hex-Bolt/1000381681 Harbor Freight (use a 20% off coupon): PITTSBURGH 12 In. Quick Release Bar Clamp - https://www.harborfreight.com/12-inch-bar-clamp-96214.html?_br_psugg_q=12+inch+clamp Please be sure to LIKE / SHARE / SUBSCRIBE! If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi everyone! In this video I assemble & weld together the 24"x48" Certiflat heavy duty welding table and leg kit! This is a FANTASTIC table and I'm extremely pleased with it. Check it out! Links to the welding table & leg kit: Certiflat 24"x48" Heavy Duty Welding Table: https://weldtables.com/collections/pro-series-welding-table-tops/products/copy-of-3x4-large-heavy-duty-welding-table-top-kit-certiflat-by-tab-slot-u-weld Certiflat 24"x48" Heavy Duty Leg Kit: https://weldtables.com/products/lk2448-u-k-cnc-tube-laser-leg-kit-heavy-duty Please be sure to LIKE / SHARE / SUBSCRIBE! If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! In this quick video, Dave & I move the '52 Chevy 3100 project over on to the 4 post car lift. Once the truck is on the lift, we can start to work on front / rear bumpers, shocks, exhaust, gas tank, air tank, compressors, etc. Please be sure to LIKE / SHARE / SUBSCRIBE! If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Welcome back! In this video I work on mocking up the rear shocks on the truck!

Welcome back everyone! In this video, we work on installing an 18,000 BTU mini split A/C system into the garage (about 780sf)! This video will give you an overview of what it takes to install the entire system from start to finish. Dave helped me get the outdoor condenser mounted to the side of the house. Steve flew in to Florida from Idaho for vacation, and was a huge help in getting the entire system up and running! Thank you guys for all the help!!!! Items used: 18,000 BTU mini split system: https://www.ebay.com/itm/18000-BTU-Air-Conditioner-Mini-Split-20-SEER-INVERTER-AC-Ductless-Only-Cold-220V/164112117611?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Outdoor Mounting Brackets for Condenser: https://www.ebay.com/itm/Wall-Mounting-Bracket-for-Mini-Split-Air-Conditioner-9000-36000-Btu-Condenser/163668441483?ssPageName=STRK%3AMEBIDX%3AIT&var=463793839926&_trksid=p2057872.m2749.l2649 16ft Line set: https://www.ebay.com/itm/COPPER-Ductless-Mini-Split-Line-Connection-Accessory-Kit-1-4-3-8-16-ft/163403885409?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 16ft. Line set PVC Cover: https://www.ebay.com/itm/16ft-Line-Set-Cover-Kit-Cover-3-Line-Set-Tubing-For-Mini-split-Central-A-C/163791489597?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Please be sure to LIKE / SHARE / SUBSCRIBE! If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Installing the Altman Easy Latch Kit into my friend Dave's '54 Chevy 3100! Follow along in this video as we install the latch kit into his passenger side door. The driver's side door install is pretty much identical. Overall the door latches work very well..... with some minor adjusting. The instructions could use some work, and we were missing the nuts for the striker bolts as well as the handle strap screws were too short. This is not a paid endorsement! Link to the latch kit: https://triquemfg.com/collections/altman-easy-latch-kits/products/altman-easy-latch-for-1952-54-chevy-truck Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Installing a Bimmerworld X Pipe without catylatic converters, 1 pair of resonators, and a Megan Racing Supremo axle back exhaust on an E92 BMW M3! Fitment for the X Pipe and Exhaust was about a 7/10, HOWEVER, the fit & finish for Bimmerworld's X Pipe wasn't the greatest. Weld splatter in the O2 sensor bungs destroyed the threads and we had to use a dremel and thread chaser to get the O2 sensors installed. For anyone else doing this install, you WILL need (4) metric nuts (not included, forgot size). These are used to hold the muffler to the rear mounts. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided By: Nuclear Ghost Peppers by TeknoAXE http://teknoaxe.com

Putting the remote control lawn mower back together and testing it out! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music provided by: LiQWYD: https://www.soundcloud.com/liqwyd https://spoti.fi/2RPd66h https://apple.co/2TZtpeG https://www.instagram.com/liqwyd https://www.facebook.com/LiQWYD https://creativecommons.org/licenses/by/3.0/ Music provided by RFM: https://youtu.be/krECjzVGdfw https://www.bensound.com My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

In this video, I repair a broken air handler drain line and make a few modifications to them. Added a concrete paver around the base of the lines and raised the lines up taller so my mower will make it under them. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Credit: Song: MusicbyAden - California Music provided by Vlog No Copyright Music. Creative Commons - Attribution-ShareAlike 3.0 Unported Video Link: https://youtu.be/GQf7cB4fY6Q Song: Erik Lund - Tokyo Sunset (Vlog No Copyright Music) Music promoted by Vlog No Copyright Music. Video Link: https://youtu.be/-jpnNRB5eTU Song: Erik Lund - One Day In Paradise (Vlog No Copyright Music) Music promoted by Vlog No Copyright Music. Video Link: https://youtu.be/Ee2seuXpCRU My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! In this video I work on upgrading the lighting in the garage! I mark, drill the holes, run the power lines between each hole, and install (16) 6" slim recessed LED lights in the garage to brighten everything up. About 4 days worth of work, condensed down into a 15 minute video! Enjoy! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: Song: LiQWYD - Midnight Sky Music provided by Vlog No Copyright Music. Creative Commons - Attribution 3.0 Unported Video Link: https://youtu.be/dcBJoloT5wA Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Welcome back everyone! In this video I insulate the garage doors using this kit from Lowes: https://www.lowes.com/pd/Insulfoam-Common-1-25-in-x-1-6875-ft-x-8-ft-Actual-1-25-in-x-1-6875-ft-x-4-5-ft-Garage-Door-Insulation-Kit-1-R-4-8-Faced-Polystyrene-Garage-Door-Foam-Board-Insulation/50244957 My garage temperature down here in Tampa, FL ranges from 90-95 degrees consistently. UPDATE: After installing the insulation, garage temperatures have consistently stayed right around 80 degrees when the garage door stays shut. I would call this a SUCCESS! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! In this video we work on finally getting the rear bed all mocked up, and bed mounts 100% complete. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Welcome back everyone! In this video we finally get the bed completely bolted together and set into place on the back of the truck! How the hell am I soaking wet but Dave isn't?!?! We are getting there..... with a lot more to do!!!! Next up, bed mounts! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: Song: Scandinavianz - Gualala Music provided by Vlog No Copyright Music. Creative Commons - Attribution 3.0 Unported Video Link: https://youtu.be/fpq8zjxFTns Song: MusicbyAden - No Love Music provided by Vlog No Copyright Music. Creative Commons - Attribution-ShareAlike 3.0 Unported Video Link: https://youtu.be/-xeK7_pe8_o Song: SKIRK - Sunrise Music provided by Vlog No Copyright Music. Creative Commons - Attribution-ShareAlike 3.0 Unported Video Link: https://youtu.be/I-7neJOuJ5g Song: Erik Lund - Summertime (Vlog No Copyright Music) Music promoted by Vlog No Copyright Music. Video Link: https://youtu.be/E338aF6QHu8 My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Welcome back everyone! In this video we work on mocking up and shortening the bed of the truck. This was a lot more work than expected so I'm breaking this up into 2 parts. Part 2 will be ready next week! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! In this video we finally get the front clip of the truck all mocked up on to the body & frame! It is finally starting to look like a truck again! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: https://www.bensound.com My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! Welcome back to the channel! In this video we finally get the '52 Chevy 3100 body bolted on to the modified '92 Chevy S10 frame! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi everyone! In this video we work on fixing the transmission crossmember so the frame is no longer pivoting on it. We also finished up the rear airbag mounts. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube Channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library Song: MusicbyAden - Bliss Music provided by Vlog No Copyright Music. Creative Commons - Attribution-ShareAlike 3.0 Unported Video Link: https://youtu.be/-dxkLiyDTTE Song: MBB - Bora Bora Music provided by Vlog No Copyright Music. Creative Commons - Attribution-ShareAlike 3.0 Unported Video Link: https://youtu.be/53ZjQWNfBcI My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! In this video I work on boxing in the frame around the triangulated 4 link brackets as well as re-enforcing those 4 link brackets. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

In this video, I work on installing a 6" C-Notch kit into the Chevy S10 Frame. This will give the rear end plenty of clearance to the frame when the truck's airbag suspension is completely aired out and the frame sits on the ground! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi everyone! DAVE IS BACK! In this video, we work on installing a triangulated four link onto the Chevy S10 frame!!!! SPOILER............ COMES OUT GREAT! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Welcome back everyone! In this video I work on removing the original Chevy S10 bump stops, and spring perches..... to prepare for installing a triangulated 4 link rear suspension and wider limited slip rear end. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

Hi Everyone! In this video I work on removing the rear leaf springs and rear end out of the Chevy S10 frame. I also start removing some un-needed rear end brackets in preparation of installing the 4 link kit. Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

In this video, we work on installing the new 2" drop spindles and lower control arms. This combo should give us about a 5" drop and put the bottom of the frame about 1" off the ground! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

In this video, we work on installing the Code 504 frame horn kit on to the S10 frame. As an added bonus, the under floor brake booster / clutch pedal assembly arrived and we installed that too! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000

In this video, we just picked up a bunch of new (to me) truck parts.... Bed, rear fenders, rear bumper, driver's side running board, front bumper filler plate, lower front fender, and dash panel. We work on unloading the trailer in preparation of more truck work! I now have pretty much all the parts needed to put the truck together! Please be sure to LIKE / SHARE / SUBSCRIBE! Check out my YouTube channel: https://www.youtube.com/c/ShowPhil If you have any comments or questions, please drop them down below. Email Contact: Rumble@ShowPhil.com Music Provided by: YouTube Audio library My Gear: Samsung Galaxy S8 DJI Osmo Pocket Canon VIXIA HF R600 GoPro Hero 3+ Nikon D7000