Jellydinosaur

Today we open a couple of packs of Legendary Duelist. The highlight for me was finding a Dark Magician Girl. Pity she was not shiny. I did not realize they even made normal printed versions of her. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Tanya the Evil towel. This is a full size printed microfiber towel. The print looks good and is only on one side. Japan has such a wide variety of merchandise for their media. It is always interesting to see what is in the arcades and crane machines in japan. Do you ever watch any channels that play crane machines? Anyway I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Tanya prize towel. I have both types pictured on the back. The printing on this looks great. It is a microfiber towel so it is a little rougher than you might be use to for a towel. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we received a box from Amiami. This was an in expensive little set that came out recently. It looked like something fun for a video. Depending on how long it takes to make some of these designs I may need to make multiple videos. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open another knuckles. Typical articulation for this line. The head is still limited by the dreadlocks. The hands are different from wave 11 same as wave 4. The little yellow spring launcher is spring loaded. There is a peg hole on the bottom like all of these accessories. I wonder if there was a plan for these pieces? I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open my second order from Kids Warehouse. Kidswhs.com has prices similar to ollies and ross but they ship. I picked up four figures. The Transformer Studio 86 Arcee, Hiss tank Megatron with Baroness and two Gi joe Classified figures Xamot and Tomax. All of the boxes had some shelf ware and dings as you can see. I will list the prices for the items below. I will be opening these on the channel soon. Please look forward to it. I hope you enjoyed the video. Thank you for watching. Take it easy. Xamot - $6.99 Tomax - $6.99 Megatron Hiss tank - $44.99 Studio 86 Arcee - $10.99

Today we open a Night Marksman GIJOE two pack. In this pack we have a Low-Light and a Night-Viper. The look of the figures is not bad and there are lots of nice accessories. The black back pack is made of rubbery material and opens up so you can store the accessories. The large rifle case stores a rifle and optic. The optic that fits in this case also plugs in to Low-Light's thigh. The rifle in this case has a little clamp so you can mount the bi-pod to it. The stock is also extendable. There is what appears to be a small radio with a swing arm and removable antenna. This little radio plugs in to the side of the backpack. There is a nice tube too. What is it for? I do not know. I thought it might be a suppressor but it does not really fit any of the firearms. The red backpack has some slots on one side so you can slip the shotgun in to it. The viper helmet slips on easy and has a hinged mask with an optic attached to it. I am not a fan of Marvel Universe figures and these are very much like the Marvel Universe line. The hands are awful and it is difficult to get the red rifle to stay in the Night-Viper's hands. This set's bubble was partially detached much like the early black series Star Wars figures. Unless I find more of these in storage I probably wont be opening any more from this line. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Hotrod. Hotrod comes with a rubbery kilt and a cloth shirt. The rubbery kilt has is split with plugs to keep it together on his left side. The shirt had a Velcro strip down the back to easily open the back of the shirt to remove it. The face looks alright but the smile looks off to me. This figure has your typical articulation for the line. It would have been nice to have a cloth kilt rather than the rubbery kilt. I am really happy with the releases for this line though it is hard to keep up with so many waves. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Metal Sonic. We previously opened this figure from the 4.5 wave. It appears to be the same figure with the same accessory. If there are any differences in this Wave 13 Metal Sonic and the Wave 4.5 Metal sonic I do not see the differences. The paint looks the same. The hands look the same. The shoes look the same. Everything looks the same. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Mikey. This Mikey transforms from Ninja to Pet turtle. Included in the box with Mikey are a set of nunchucks with rubbery adjustable plastic ropes, a mutagen canister, a pizze that turns in to a shurican and a small can of turtle pet food. The transformation is more complex than bebop but it is still fairly simple. Pop the shell open at the top. switch out the head, tuck the arms behind his back pull out the legs inside the shell and then turn his normal legs forward to act as the front legs. I think maybe the rubbery sides are meant to cover the legs. I will have to play with it a bit more to be sure. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we assemble some boot-lego guns. These work really well with Lego mini figures, MegaBloks and KRE-O figures. Some parts could use a little cleaning to remove excess material. For the most part the runners were all very open and easy to snip loose. The bazooka works well. There is a little spring loaded handle that you pull pack and lock in place to charge it. Once charged you can load one of the missiles in the front. As long as you to not shove it in too tight it will fire pretty far when you release the charging handle. The other spring is for the mortar. Drop the spring in to the mortar tube then push one of the missiles down holding it in place. When you are ready to fire the mortar slip your finger off of the missile in the tube and it will launch. Keep an eye on the mortar spring as it may launch with the missile. The rest of the guns are all on adjustable tripods. They also have little magazines you can remove and replace. You get a nice variety of heavy weapons in this set. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we assemble a small hotel to add to our growing boot-lego street. The picture of this set is much better looking than the actual set. The picture makes the set appear more golden while the actual blocks are some shade of brown. Aside from the dull brown bricks this is a good set. It looks like it should build wise. The translucent bricks make it much more interesting lit up as wall. The instructions were fairly easy to follow. I did have to fix a few placed parts as i progressed during the build but it was nothing major. As usual with these sets the bricks fit together nice and tight and stay together. I am hoping to find more of these sets so i can continue building a street of these sets. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open some balloons. These Smurf balloons were requested by a viewer. They were cheap enough that it was not too much trouble. I purchased these from Bargain balloons. Bargain balloons got the items in the mail quickly and they arrived within two business days. The edges of the balloons are a little rough with some excess material hanging on the edges. Blowing these up was fairly easy with a metal straw. You do need some sort of insert to blow these up as they have an auto seal feature. Despite the small size of the package these balloons are huge! I am very pleased with the quality. I might have to see what else they have to offer. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open more mini brands. This time we have some mini books. There are soft cover and hard cover books. Each ball contained a plastic shelf. The shelves can be single cubes or attached and stacked. It looks like the first page has is readable while the inside pages that are printed are just little squiggles. The little magnifying glass seems to work somewhat. I am always glad to have more props for my fumo friends. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open The Metal Box from the first episode of The Tick cartoon. This is a great little playset straight out of the show. There were no instructions or paperwork inside the box. Though this appeared sealed I suspect it may have been resealed. The box does show other figures and how to operate the device though so it could be they just did not need to include any paperwork. I do not have a Tick figure to put in it. Any 4-6 six inch figure will likely fit in the device. There are a lot of little details to this set. To open the set you pull up on the cylinder at the top. Ideally everything should then pop loose. This one needed a little help but once deployed it looks great. There are lots of little arms with various weapons and garden utensils attached. Speakers on the left and right side for some reason. Swing up panels covered in spikes and finally a missile that can be deployed by pressing the light on the top of the release cylinder. On the back of the device there is a lever you can use to move the orange chair inside from side to side. This is a great little playset. It reminds me of something playmates might have made for the 80s Turtles line. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Yukari. The window in the box fell off inside of the box. The figure and parts are all in new condition though. This is an older figure but she has not become sticky over time like some other figures from around the same time. Yukari looks great. She has her big floofy hair, a stand, an extra neck, three faces, Three sets of arms/hands, a set of gloved hands that can hold a shell and the gun of her tank. The gun part plugs in to the Nendoroid stand included in the box. Removing her skirt to get the plastic off was fairly tough. The peg was a tight fit. The two spare faces that were in the tray were also a very tight fit in to her hair and the neck plate. I recommend removing the neck plate to insert it in to the other faces. The shell can be removed from the hand it is attached to. It plugs in to the hand it is not glued. You can expect the standard Nendoroid articulation. There is nothing special about this figures articulation. This is another great little Nendoroid. I would like to get one of the tiny nendo tanks to put her in it. I will keep an eye out for one. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Smurf Reiver. In this package we have a new Jump pack with flappy hinges and a new Bolt Carbine. The helmet gets a little paint work adding a scary skull to make this marine look even more deadly. I have not been keeping up with the McFarlane 40k stuff but so far I have been enjoying all of the figures I have opened. Even the unpainted "proof" I have opened was very nice. The articulation on these is pretty good despite the armor limiting some movement. While I was messing around with his left arm it popped out of the socket. It easily popped back in and is not loose at all. I was able to install the gun in to his hand without too much trouble. The jump pack was easy to slot in and stays on nice and tight. I like this line a lot. I am hoping to pick up more soon. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open some Detective Conan TCG packs. I have been looking forward to opening some of these myself after watching several other channels open the newly released booster boxes. The boosters are a bit pricey at the moment so I picked up some loose packs instead for about a quarter of the price. I just learned there is a Conan starter deck so I will see if i can get my hands on one of those for a future video. These cards are very nice. The print is clean, the card stock is slightly thicker than regular Yu-Gi-Oh. The cards are also larger than Yu-Gi-Oh cards. The print on the commons almost looks like it has a texture to it when turning the cards in the light but they are smooth to the touch. There were a lot of doubles in the 17 pack sample I opened but not a terrible ratio based on the size of the set. I do have a long way to go to complete both commons and the rares. The Rares look great. There are multiple styles for the rare cards. At several points I thought I was pulling different sub sets of Rare cards but that was not the case. As usual cutting these open seems to be the way to go. Those designated tear divots never seem to work for me. The pack material is thicker than Pokemon or Yu-Gi-Oh but not MetaZoo or bootleg thick if that makes sense. I did have a few cards with dings on them. It was only on the Rares and in the same place on both cards so I believe that damage happened before the cards were packaged. It was not too severe and flattened out clean.. Speaking of flat all of the common cards were perfectly flat and all of the rare cards were warped. It was not noticeable while opening the cards but stacking up my doubles in order with rares on the back made it very noticeable as there was a clear bend and gap between the commons on top of the rare stack. All that being said I will be getting more of these. I like what I received overall and I am looking forward to opening more. Thank you for watching. Take it easy.

Today we make some 3d printed rubbery dust plugs for the NEO GEO Pocket Color. They both fit in nice and stay in without being too tight or difficult to remove. If you need a set of these or just one piece you can find them on my Jellydinosaur etsy shop.

Today we open a Starwing. Starwing is a Mecha Musume style Starscream figure by Iron Factory. She is a little smaller than I expected. Just slightly taller than a classic 3 3/4 inch GI JOE figure and slightly shorter than the 25th anniversary GI JOE figures. Included in the box are three finished faces, two unfinished faces, seven sets of hands and a clip to attach her at the back to a stand. There is no stand included. All of the decals are water slide so it is unlikely I will be applying any of those any time soon. While I was swapping her hands her left arm popped off a few times. It popped back in easily and does not feel loose at all. I was probably just being a bit ham handed. The articulation is pretty good for the size of the figure. The most notably missing articulation is at the wrist. The hands peg in and they do not have hinges. I love Mecha Musume. I am always looking for more Robo mecha girls for my collection. I am looking forward to more from this line. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a shadow. As far as I can tell this is the same as the Shadow in Wave 4.5. The only difference is this Shadow comes with three rings instead of a 10 ring. I really like his shoes a lot. He is a bit top heavy and somewhat difficult to balance. The rings easily fit in to his hands. I think anyone would find it difficult to tell the difference between this Shadow and the 4.5 wave Shadow. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open some KRE-O blind bag figures. These are much better than the regular smaller KRE-O figures. The arms and legs are on balls so you get a bit more range than LEGO and a lot more articulation than the small KRE-O figures. If you are familiar with the more recent GI-JOE bricks that came out recently with the classic toy box art, these are not those. The KRE-O line of GI-JOE bricks is far superior to the "Forever Clever" line that came out recently. Most bootleg Chinese sets I have bought from TEMU are better than the recent "Forever Clever" sets. We got a pretty good variety in the few packs we opened. I do have the rest of this line somewhere in little cases. Maybe I will do another video and show the rest of this wave when I find them. I really like the Cobra Eel in this set a lot. I am glad I was able to pull him for this video. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a Super Mario type B playset. This set includes spare hands for figuarts mario, two pipes, a green shell, a shiny coin and a goombah. The Goombah and Shiny coin are repeats from the A set. The turtle shell has some holes in it so you can plug clear plastic pegs in to it and then in to the included Mario hands so it appears mario is holding the turtle shell. The pipes are interchangeable. You have a short pipe that is as deep as it is tall. The tall pipe is only about one CM deep. You can remove the top of the tall pipe and slip the short pipe on to the tall pipe making it a bit deeper. The pipes are nice but I did notice a mark on one of them that looked like a spot where the runner was cut off from the molding process. It can be turned to face away and out of view but I was not expecting that from a figuarts playset. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we open a NES RoboCop. This is a nice detailed figure. The articulation is not bad for a stiff armored robot. Initially I could not see or tell there was a wrist cut. Well maybe it would be considered a glove cut since it is a bit higher on his arm. It took some force to free it too. The holster in his hip is spring loaded. Though I did help it close by moving both parts in to place in this video I found later, pushing the front part back that the side piece swung in to place on its own. Pushing the clip on the back of his leg releases the spring loaded holster open. Whoever worked out that mechanism is a master in their craft. The gun fits in side though it is a small area to work it in to. The gun looks great in profile but head on it is very thin. Maybe they just needed to make it thin for the holster but a second thicker gun would have been nice. I picked this NES color RoboCop several years ago. I would have preferred the normal color but I expect the ebay price prohibited me from purchasing it at the time. I am still very happy with the figure. I hope you enjoyed the video. Thank you for watching. Take it easy.

Today we assemble a pikabus. This not pokemon set is really nice. Everything snaps together well. The instructions were easy to follow and the booklet was nicely printed. I have seen another version of this where the face is on the bumper rather than the top. I am not sure if those are interchangeable pieces but it looks much better near the top where the ears are. I am really enjoying these little bootleg sets. I am going to run out of space for these. I hope you enjoyed the video. Thank you for watching. Take it easy. Temu Affiliate code: acm818077