Qolsys IQ Panel 4: Use SmartStart to Include Z Wave Devices
In this video, Dylan from Alarm Grid shows you how to use the SmartStart feature to add Z-Wave devices to the Qolsys IQ Panel 4. SmartStart allows a dealer to pre-load Z-Wave devices into a system prior to shipping it to a customer. Then, once the panel is installed and powered on, as each Z-Wave device is installed and powered on, it automatically joins the network.
DIYers can also use this feature to simplify Z-Wave device installation. In order to support SmartStart, the Z-Wave device must support S2 security. That means that the device will be a Z-Wave Plus or higher version product. Devices that support SmartStart will have a QR code on their packaging and should indicate support for the SmartStart feature.
To enroll a Z-Wave device with the Qolsys IQ Panel 4 using SmartStart begin by tapping the gray bar at the top of the panel screen. Select Settings then Advanced Settings. Enter the Installer or Dealer Code (1111 or 2222 respectively, by default). Next choose Installation, then Devices, then Z-Wave Devices, and finally SmartStart.
This will bring up a screen showing the view from the panel's front-facing camera and a number pad. You can either scan the QR Code from the packaging, or from the device itself. Alternatively, you can enter the 40-character DSK code shown on the box. Once the QR code has been picked up by the panel's camera, or the DSK code has been entered, basic information about the device will be shown on the screen. You can edit the device name by tapping the generic name provided and either choosing from the list, or choosing Custom Description and entering whatever you want. Once that's done, press Add.
This takes you to the provisioning list. This is a list of all Z-Wave devices being added using SmartStart and their current status. A status of Not in Network means that the QR Code or DSK has been entered, but the panel has not yet heard from that device. Now, install and/or power on the device. The panel will communicate with it, and will add it to the Z-Wave network. This will change the status in the provisioning list screen to Started, and eventually to Included. At this point, the device has been successfully added to the network and is ready to be used through the panel, and Alarm.com, if the panel is tied to an account with support for Automation.
https://www.alarmgrid.com/faq/how-do-i-use-smart-start-to-enroll-z-wave-on-an-iq-panel-4
-
4:37
Alarm Grid Home Security DIY Videos
8 months agoQolsys IQ Panel 4: Change the Master Code
22 -
LIVE
The Podcast of the Lotus Eaters
4 hours agoThe Podcast of the Lotus Eaters #931
2,819 watching -
12:38
History With Kayleigh
1 day ago $0.08 earnedWhy Are Most Men From Ancient Egyptian Depicted Bald?
3.9K54 -
20:32
Popcorn In Bed
13 hours agoTHE MATRIX (1999) | FIRST TIME WATCHING | MOVIE REACTION
9.57K34 -
14:23
Freakin' Reviews
18 hours agoIs This Toaster Worth $100?
13.8K19 -
6:18
ThinkStory
1 day agoDARK MATTER Episode 6 Breakdown, Theories & Details You Missed!
15K3 -
14:00
JoBlo Horror Originals
1 day ago3 From Hell: A Lazy Revival Of The Firefly Clan
14.9K4 -
8:01
LenaPetrova
14 hours ago🚨BRICS IS EXPANDING: Turkey, a NATO Member, Announces Plans to Join BRICS Bloc in 2024
8.78K6 -
6:44
Chris Jericho
20 hours agoTalk Is Jericho Highlight: Gypsy Rose & Ryan - The Exclusive Interview Before The Split
14.9K4 -
26:52
Science & Futurism with Isaac Arthur
22 hours ago $0.16 earnedSpace Freighters: Cargos & Crews
15.5K7