2017-2020 Hyundai Elantra – Change Transmission Fluid (ATF) and How to Remove that Pesky Fill Bolt

1 year ago
38

My daughter purchased this car a few months ago and we do not know the maintenance history. It has 129,204 miles. In this video we will change the Automatic Transmission Fluid (ATF). The most difficult part of this job, if you are doing it for the first time, is removing the fill bolt. It is a poor design but in this video you will see how to successfully remove it, and modify it, so it will not be a problem in the future. I recommend changing the ATF every 30,000 miles. If you are like us, and purchased it used and don’t know the history, just start where you are and then do it every 30,000 miles.

Remember, this is my first time performing all of this maintenance on this car. You are watching me learn on the video. If you need to skip ahead to an area of interest, this will help you out:

Highlights
0:36 Remove Air Box
5:27 How to Remove Fill Bolt
14:40 Winning the Victory Over the Pesky Fill Bolt!
16:00 Modifying the fill bolt so it will never be a problem again!
17:28 I put the fill bolt in its place! (See what I did there)
18:40 Drain bolt location
21:00 Remove drain bolt and drain fluid
25:05 Install drain bolt
28:03 Add fluid
33:35 Install air box

For information on how to put the vehicle on jack stands and remove and install the skid plate under the car in order to gain access to the drain bolt, please reference my longer video found here: https://rumble.com/v2a4avm-2017-2020-hyundai-elantra-transmission-coolant-oil-fumoto-valve-tire-rotati.html

When you look at that video, look in the description and you will find the Highlights that reference Jack Up Vehicle, Remove Skid Plate, Skid Plate Summary, Install Skid Plate.

Helpful Notes for you:

2-quart pitcher used in video:
https://www.amazon.com/gp/product/B007IBJIBG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

TRANSMISSION
6-speed torque converter automatic
Capacity: 7 quarts
Drain and fill: 4 quarts
ATF SP4
Hyundai Fluid: SP4 or SP4-M
Valvoline MAX Life ATF full synthetic
Quantity: Approximately 4 quarts

Fill bolt on top
Drain bolt on bottom: 24mm, torque to 30 ft.-lb.
Crush Washer: 18 mm

Loading comments...